1400kW Diesel/Gas Fired Thermal Oil Boiler Delivered to Guatemala

YGL 2900kW Biomass/Wood Thermal Oil Boiler | High-Temperature Heating System Bangladesh
YGL vertical wood biomass thermal oil heater boiler, manual feeding type, low consumption cost thermal oil heater boiler.

The 900kW electric thermal oil boiler provides stable and precise temperature control for plastic extrusion and molding processes in Peru’s plastic industry. Using electricity as a clean energy source, it ensures high efficiency, uniform heating, and zero emissions. Ideal for energy-saving industrial applications requiring continuous heat supply.

The 5600kW diesel fired thermal oil boiler is designed for chemical plants in Saudi Arabia, providing stable heat at temperatures up to 280°C with an output pressure of 6 bar. This system ensures precise temperature control for reactors, dryers, and chemical processing lines, offering high efficiency, safety, and reliable continuous operation.

YYQW series thermal oil boiler, adopt horizontal chamber combustion three-coil structure, its body is composed of outer oil, middle oil, inner oil and rear oil.  

Yuanda 500kw Electric Thermal Oil Heater Boiler, Heating Thermal Oil 300/280°C. No pollution industrial oil heating system.

YYQL series Vertical gas oil fired thermal oil boiler is packed and full automatic thermal oil boiler, adopts three-pass structure, full corrugated coil. The heat carrier is heat conduction oil, rated working pressure 1.1MPa, working temperature ≤350℃. After boiler arriving at users’ site, only need to consider to fill the heat conduction oil, connect fuel (gas or oil) and electricity source.

YLW thermal oil heater is square coil horizontal chain grate shop-assembled heater, chain grate and heater proper are transferred separately. It adapts chain grate to realize mechanical feeding coal, mechanical venting by blower and induced draft fan, and mechanical discharging by slag machine.

Fuel falls on the grate from coal bucket during operating and burning, high temperature smoke enters furnace by passing combustion arch, after radiation heat exchange, smoke enters convection heating surface for convection heat exchange, then goes to waste heat boiler and air heater, at last enters dust collector then is vented into the atmosphere through chimney by induced draft fan.

Elevate your heat transfer capabilities with the 1400kw Gas Fired Hot Oil Boiler YYQW Horizontal Boiler. Specifically designed for efficient heat transfer, this horizontal boiler utilizes gas as its fuel source. With a capacity of 1400kw, it provides reliable and consistent heat for various industrial applications. The YYQW design ensures optimal heat transfer efficiency, making it suitable for a wide range of heating processes. Trust the Gas Fired Hot Oil Boiler YYQW Horizontal Boiler to deliver clean and efficient heat, enhancing productivity and energy efficiency in your operations. Experience reliable and high-quality heat transfer with this advanced horizontal boiler solution.

Yuanda YYQL series vertical thermal oil boiler.
Fuel: diesel lpg gas oil
Capacity: 1400kw, 1200,000kcal
Thermal-oil heating systems for Resins — precise temperature control, low-pressure safe operation, high efficiency and multi-zone heating.
PLC remote monitoring and tailored designs ensure consistent product quality and reliable production.

Calentador Fluido Termico Eléctrica de 900kW de Yuanda Boiler fue instalada con éxito en una fábrica de producción de película plástica en Perú.

1,200,000 Kcal/h gas fired thermic fluid heater delivered to Indonesia for industrial heating. The thermal oil heating system provides stable, efficient and reliable high-temperature heat for various production processes.

Optimize your heat generation in the furniture industry with the Automatic Biomass Thermal Oil Heater. Specifically designed for the furniture industry, this thermal oil heater utilizes biomass as a sustainable and renewable fuel source. With its automatic operation, it ensures convenient and hassle-free heat production. The thermal oil system provides consistent and efficient heat transfer for various furniture manufacturing processes. Trust the Automatic Biomass Thermal Oil Heater to deliver reliable and clean heat, improving productivity and reducing environmental impact in the furniture industry. Experience efficient and eco-friendly heating solutions tailored to your furniture manufacturing needs.

YLW series biomass thermal oil boiler 1400kw, 1200000kcal.
Horizontal chain grate, automatic feeding, thermal oil heating system.

700KW 600000kcal Thermal Oil Heater Boiler

Oil Boiler For Chemical Industry.
Yuanda Horizontal Diesel Gas Fired Thermal Oil Heater Boiler For Industrial Use.

Yuanda 3sets 7MW dual-temperature gas-fired thermal oil boilers for a leading petrochemical enterprise in Shaanxi.

YY (Q) W series thermal oil boiler is a kind of boiler which uses gas(oil) as fuel ,thermic oil as medium, hot oil circulation pump to make the medium to forced circulation, deliver the heat to heating need equipment and then go back to the heating furnace.It can obtain a high operating temperature at low pressure and can do high-precision control on the medium.
1.Quick-setting high strength refractory material,have strong power of solidification and long using cycle.it does not shake off.
2.Integrated and wiring device,more convenience for the wire connection,make overhaul more simply,elegant appearance after installation
3.Double-deck aluminum silicate for heat preservation,the surface temperature of the boiler is no higher than 40℃,energy conservation and efficient
4.Design of angular and smooth surface of outsourcing panel,prevent the injury accident when checking the equipment
5.The outer oil collecting box is designed to prevent the slow rate of grease from carbonizing avoid air leakage
6.Double seal groove design, secondary prevent air leakage design, tight seal, avoid air leakage
7.Unique coil tube repair and integration process, the disk is compact and no gap,there is no smoke short circuit,long gas flow, heated fully, high efficiency
8.Boiler multistage energy saving device design (the tail can set air preheater, wasted heat boiler,economizer),low smoke exhaust temperature, improve boiler efficiency 10%

Advantages
1.Double seal groove design
Secondary prevent air leakage design, tight seal, avoid air leakage
2.Unique tail heating surface design
Boiler rolling chamber wet back structure,small boiler heat loss,avoid overheat caused by over-burning of side panels, and increase thermal efficiency by 2-3%.
3.Unique coil tube repair and integration process
The disk is compact and no gap,there is no smoke short circuit,long gas flow, heated fully, high efficiency
4.Boiler multistage energy saving device design
The tail can set air preheater, wasted heat boiler,economizer,low smoke exhaust temperature, improve boiler efficiency 10%
5.Design of angular and smooth surface of outsourcing panel
Prevent the injury accident when checking the equipment
6.Triple coil,three-pass smoke,fire wrapped in oil structure design,
Large radiant heating furnace,high thermal efficiency of the boiler,prevent the boiler shell from firing deformation at the high temperature
7.Research PCL control board independently,strong compatibility
PLC intelligent touch screen equipment,10-inch touch screen,fool-type operation,safe and reliable,automatic ignition/flame-out/fire switch,high fired gas,low pressure protection,gas leakage protection
8.Large load imported burner configuration
80% configuration ratio,light load drive,enough thermal energy import,guaranteed output,reduce equipment use fatigue,extend the service life,the quality of inlet valve group is steady and reliable
9.60years’precipitation,mature production technicians team,good matching among the set of equipment,technology skilled,stable quality
10.material supplied by large international factory,manufactured by Anyang Iron Steel and Tianjin Seamless Steel Pipe plant,ensure the quality

Oil Boiler For Chemical Industry.
Yuanda Horizontal Diesel Gas Fired Thermal Oil Heater Boiler For Industrial Use.

Enhance your heat transfer capabilities with the 600000kcal Thermic Fluid Heater Gas Fired Heaters. Designed for efficient heat transfer, these gas-fired heaters utilize thermic fluid as the heat transfer medium. With a capacity of 600000kcal, they provide reliable and consistent heat for various industrial applications. The gas-fired operation ensures cost-effectiveness and reduced environmental impact. Trust the Thermic Fluid Heater Gas Fired Heaters to deliver clean and efficient heat transfer, enhancing productivity and energy efficiency in your operations. Experience reliable and high-quality heat transfer with these advanced gas-fired heaters.

Yuanda Industrial Electric Thermal Oil Heater Boiler, Heating Thermal Oil 150°C-280°C. No pollution industrial oil heating system.

YYQW series diesel gas fired thermal oil heater boiler, horizontal three pass three coils thermal oil heating system. 7000kw 6million kcal thermal oil boiler for oil gas field.

YLW thermal oil heater is square coil horizontal chain grate shop-assembled heater, chain grate and heater proper are transferred separately. It adapts chain grate to realize mechanical feeding coal, mechanical venting by blower and induced draft fan, and mechanical discharging by slag machine.

Fuel falls on the grate from coal bucket during operating and burning, high temperature smoke enters furnace by passing combustion arch, after radiation heat exchange, smoke enters convection heating surface for convection heat exchange, then goes to waste heat boiler and air heater, at last enters dust collector then is vented into the atmosphere through chimney by induced draft fan.

YQ(Y)W series gas-fired/oil-fired thermal oil boilers have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.

This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

YYQW series horizontal coil heater thermal oil boiler 240kw 350kw 700kw 1050kw 1400kw2100kw 2800kw 3500kw 4200kw 5600kw 7000kw

Thermal oil heater by gas, diesel, lpg.
YYQW horizontal thermal oil heater boiler, high efficiency hot oil heating system.
1.It is easy and convenient to install the boiler,only setting the boiler on the foundation.
2.Heating surface is formed by round coilers, sufficient arrangement, reducing thermal load of tubes surface to ensure safety.
3.Furnace dimensions is matching with the combustion flame,positive pressure combustion,high radiation heat exchange efficiency.
4.Boiler structure is compact,saving the floor area of boiler room.
5.An air pre-heater or heat recovery boiler is placed behind the boiler to improve the thermal efficiency.

YGL vertical wood biomass thermal oil heater boiler, manual feeding type, low consumption cost thermal oil heater boiler.

Yuanda YYQW Horizontal type diesel/gas/lpg fired thermal oil boiler 350kw 500kw 700kw 1400kw 2100kw 2800kw 3500kw 4200kw 5600kw 7000kw 14000kw.
ASME qualified thermal oil boiler deliver to Malaysia.

Elevate your heat transfer capabilities in the oil and gas industry with the Portable 2100kw Heater Boiler. Specifically designed for oil and gas industry applications, this portable boiler provides efficient and reliable heat transfer. With its 2100kw capacity, it meets the heat requirements of various oil and gas processes, ensuring precise and consistent temperature control. The portable design allows for easy transportation and installation, making it suitable for temporary or remote locations. Trust the Portable 2100kw Heater Boiler to deliver clean and efficient heat transfer, enhancing productivity and meeting the specific needs of the oil and gas industry. Experience reliable and high-quality heating solutions for your oil and gas operations.

YLW coal fired thermal oil boiler is a kind of new type heating equipment, the fuel could be coal, biomass or flue gas, the heat carrier is heat conduction oil, the circulating pump force heat transfer medium circulating in liquid phrase, and transfer heat to heat user equipment, then return to the heating furnace for reheating. It is an safe and low energy consumption boiler with working characteristics of low pressure (1.0 MPa) and high temperature (350℃). The boiler medium is working under liquid state, so it is safe and reliable.

Yuanda 3sets 7MW dual-temperature gas-fired thermal oil boilers for a leading petrochemical enterprise in Shaanxi.

The Industrial Helical Coil Thermal Oil Heater is a highly efficient and reliable heating system designed for industrial applications that require uniform and precise temperature control. Using thermal oil as the heat transfer medium, it provides indirect heating at temperatures up to 200–350°C under low operating pressure. The heater features a helical coil structure, ensuring optimal heat transfer, compact design, and long service life. It is widely used in industries such as chemical, textile, food, plywood, bitumen, and oil processing.

Project: Vertical thermal-oil heating boiler for reactor heating, producing alkyd in Nigeria
Yuanda YYQL series vertical thermal oil boiler.
Fuel: diesel lpg gas oil
Capacity: 1400kw, 1200,000kcal

YLW Horizontal wood/biomass thermal oil boiler.
Wood/Biomass thermal oil boiler, horizontal three pass coil structure, use circulating pump to force the liquid thermal oil circulation,and then transporting the heat to the thermal equipment.

Thermal oil boiler could instead steam boiler for industrial production, to improve productivity. Yuanda thermal oil boilers are widely used for petroleum chemical industry, Oleochemical industry, Synthetic fiber industry, textiel printing and dyeing industry, plastic and rubber industry, paper industry, wood industry, building materials industry, machinery industry, food indstry, electrical equipment industry, coking industry, etc.

We supply industrial biomass burner boiler, Combustion device is wood/biomass burner. It could be a steam boiler, hot water boiler, thermal oil heater boiler.
Thermal capacity in 350 kw 700 kw 1400 kw 2100 kw 2800 kw 3500 kw 4200 kw 5600 kw 7000 kw 14000 kw.
Horizontal biomass fired thermal oil coil heater boiler, working with biomass burner. Automatic operation thermal oil heating system boiler. High efficiency thermal oil heating at 200 °C 250 °C 300 °C 320 °C.

YYQW horizontal thermal oil boiler / 200kw-14000kw boiler / three-coil oil heater
YYQW series thermal oil boiler, adopt horizontal chamber combustion three-coil structure, its body is composed of outer oil, middle oil, inner oil and rear oil.

YY(Q)W series gas oil fired thermal oil boiler is packed and full automatic thermal oil boiler, adopts three-pass structure, full corrugated coil. The heat carrier is heat conduction oil, rated working pressure 1.1MPa, working temperature ≤350℃. After boiler arriving at users’ site, only need to consider to fill the heat conduction oil, connect fuel (gas or oil) and electricity source.